Sun Jun 23, 2013 11:23 am
Recipe Specifications
--------------------------
Boil Size: 3.83 gal
Post Boil Volume: 2.70 gal
Batch Size (fermenter): 2.50 gal
Bottling Volume: 2.40 gal
Estimated OG: 1.053 SG
Estimated Color: 5.4 SRM
Estimated IBU: 26.2 IBUs
Brewhouse Efficiency: 77.00 %
Est Mash Efficiency: 80.1 %
Boil Time: 90 Minutes
Ingredients:
------------
Amt Name Type # %/IBU
2.50 gal Balanced Water Water 1 -
1.46 g Calcium Chloride (Mash 60.0 mins) Water Agent 2 -
0.95 g Baking Soda (Mash 60.0 mins) Water Agent 3 -
0.87 g Gypsum (Calcium Sulfate) (Mash 60.0 mins Water Agent 4 -
0.69 g Epsom Salt (MgSO4) (Mash 60.0 mins) Water Agent 5 -
0.43 g Chalk (Mash 60.0 mins) Water Agent 6 -
1.81 kg Belgian Malt (3.9 SRM) Grain 7 75.0 %
0.26 kg Spelt Malt (2.3 SRM) Grain 8 11.0 %
0.12 kg Acidulated (Weyermann) (1.8 SRM) Grain 9 5.0 %
6.12 g Sorachi Ace [12.00 %] - Boil 60.0 min Hop 10 24.5 IBUs
0.50 Items Whirlfloc Tablet (Boil 15.0 mins) Fining 11 -
2.55 g Sorachi Ace [12.00 %] - Boil 1.0 min Hop 12 1.7 IBUs
1.0 pkg American Farmhouse Blend (White Labs #WL Yeast 13 -
0.22 kg Fruit - Raspberry (0.0 SRM) Adjunct 14 9.0 %
Mash Schedule: My Mash
Total Grain Weight: 2.41 kg
----------------------------
Name Description Step Temperat Step Time
Beta Rest Add 2.06 gal of water at 160.8 F 147.0 F 60 min
Sparge: Batch sparge with 2 steps (Drain mash tun, , 2.60gal) of 168.0 F water
I plan to add raspberry after primary slows down as a sugar addition to keep the fermentation rolling. Start ferment at 68, hold for 48 hours then ramp up 1* every 12 hours up to 80 and then hold. I want to give the Bret in the farmhouse blend a chance so I will keep it rolling for 3 weeks.
Questions
1) I am a little concerned about the time and temp.. Will I need to go to a secondary fermenter at some point?
2) Water: I am having trouble trying to figure out my salt additions to RO. Do I treat the water to get a ppm after boiling and cooling or do I treat the total volume of water. In this v=case I will run a total of 4.66 gal through the grain, but my batch size, going in to the fermenter, is 2.5 gal.
3) When adding a grain to beersmith, such as the belgian malt in this recipe that I got from Colorado Malting, do you adjust the Lovibond # from the malt analysis to SRM via SRM=(1.35 x *L) -.06?
I know that is a lot of questions to ask and I suspect I wont get an answer for each, but feel free to critique the recipe all you want and answer what you will.
Thanks!