I fill the keg with CO2 from the beer outlet (dip tube side) and pressurize, then I slowly let the release valve open for a few seconds (20-30 should do it) pull off the co2 and depressurize with the release, and you should be good to go.
BUB
Siebel's notes say a tank can be “...purged with CO2, but this is an inefficient and ineffective way to achieve the CO2 atmosphere. The most effective way is to fill the tank with water, push the water out with CO2 and the fill with beer.â€
Return to Kegging, Bottling and Dispensing
Users browsing this forum: No registered users